Specification
- Items: Pavo Pico Brushless Whoop Quadcopter
- Color: Black
- Flight Time*: 4min
- Wheelbase: 80.8mm
- FC: F4 1S 12A AIO Brushless FC V3 (STM32F405 MCU Version)
- Battery: 2S 450mAh 45C
- Props: GF 45mm-3B black propeller
- Motor: 1102 | 14000kv red and black (2022)
- Weight (No Battery): 71.2g (DJI O3) 66.02g (Vista) 65.88g (Avatar)
- Frame: Pavo Pico Brushless Whoop Frame
- HD VTX: Support DJI O3 Air Unit Caddx Vista Kit / RUNCAM Link / Walksnail Avatar HD Pro Kit installation.
- RX Version: Serial ELRS/TBS
- FPV Camera: Support DJI O3 Camera Caddx Series RUNCAM Series 19mm/20mm Camera Avatar HD Pro Camera
Note: The flight time is calculated under 8.4V~6.8V. And the Pavo Pico Brushless Whoop Quadcopter does not include HD VTX and Camera.
HD Digital VTX System
Pavo Pico supports various types of HD VTX. DJI O3 and Walksnail Avatar Pro Kit both support HD digital VTX up to 1080P using dual-band transmission technology for better signal stability. The Vista Kit supports digital signal transmission for HD video up to 720P with low latency and superior image quality performance. Its compact and lightweight making it great for small drone installation and compatible with various remote controls and monitors. The customized HD VTX mounting bracket has a split design making it effortless to install for pilots DIY and explore more possibilities while ensuring HD image quality.

ND Filter for DJI O3 Camera
BETAFPV ND Filter for DJI O3 Camera is specifically designed for the Pavo Pico Brushless Whoop Quadcopter. Meanwhile the DJI O3 Air Unit ND Filters are tailored for the DJI O3 Air Unit and are capable of reducing the amount of light that enters the camera lens. With this feature you can achieve slower shutter speeds or wider apertures when flying. These lightweight filters are crafted from high-quality optical class ensuring optimal image clarity and are too easy to install on the build.


Click to watch the installation guide video for DJI O3 Air Unit on Pavo Pico.

DJI O3 Vibration Problem
To tackle the challenge of vibration on many whoop drones the DJI O3 unit is mounted on a carbon fiber plate with 4 rubber dampers. This innovative design ensures peak performance and perfect stability.

Troubleshooting:
To improve video quality when recording with DJI O3 HD VTX turn off its electronic stabilization and use GyroFlow stabilization software.
When fixing the HD VTX bracket with M1.4*10 screws ensure that the nut just touches the shock-absorbing ball.

Pilots can further customize their cinewhoop with DIY options such as battery straps or printable components allowing for compatibility with a variety of battery sizes. This enables pilots to tailor and enhance their cinewhoop to meet their specific requirements and preferences. Steps as follow:

Flight Controller
F4 1S 12A AIO Brushless FC V3 the FIRST flight controller designed specifically for HD VTX. This whoop quadcopter is equipped with STM32F405 chip for high-performance calculations. It weighs only 4.2 grams and includes a Serial ELRS 2.4G receiver 16MB Black Box Barometer and Current meter. Designed for HD VTX it also added support for external GPS through Betaflight 4.4.0.

Power system
The 1102 14000kv motor brings stronger power and lower noise delivering abundant thrust and impressive speed that enable effortless execution of aerial maneuvers. Paired with the high-performance Gemfan 45mm propeller this power system achieves superb balance ensuring powerful lift and stable flight while also providing precise and responsive control. The combination of these power systems makes it an excellent choice for Pavo Pico allowing pilots to easily accomplish filming tasks.

Carbon Fiber VTX Adapter
We found that the installation dimensions of the Vista and Avatar HD Pro digital VTX modules closely match those of the O3 digital VTX. Thus Installing a carbon plate with mounting holes that measure 20x20mm is sufficient to mount both digital VTXs. Install quickly and effortlessly while meeting pilots various DIY needs and exploring more possibilities for flying
Recommend Parts
- Motor: 1102 | 14000kv Brushless Motor
- Propeller: GF 45mm 3-Blade Propeller GF 45mm 2-Blade Propeller
- Battery: 2S 450mAh 45C Lipo Battery
- FC: F4 1S 12A AIO Brushless FC V3
- ND Filter: BETAFPV ND Filter for DJI O3 Camera
- Frame: Pavo Pico Brushless Whoop Frame
- Support HD Digital VTX: DJI O3 HD Digital VTX Avatar HD Digital VTX Vista HD Digital VTX Runcam Link


Package
- 1 * Pavo Pico Brushless Whoop Quadcopter (Without HD Digital VTX Camera)
- 1 * 2S 450mAh Battery
- 4 * GF 45mm-3B Propellers
- 1 * USB Parameter Adjustment Cable
- 1 * 5.8G Copper Tube Antenna Package
- 1 * VTX Bracket Screw Package
- 2 * DJI O3 HD Digital VTX Antenna Mount
- 2 * DJI O3 HD Digital VTX Mounting Bracket