ที่ชาร์จ usb wifi เฝ้าบ้าน ภาพและเสียง ไม่หลุดสายตา เฝ้าบ้านแต่เรา ภาพคมชัด 2MP 2ล้านพิเซล แถมที่โอนข้อมูล

WIFI support
APP supportLook cam
Video format: AVI
Video encoding: M-JPEG
Video resolution: 1920x1080/30 fps
Audio: support
Charging Voltag: 5V
Interface type: Micro USB
Memory storage: 16-128GB (FAT32)
Pictures: no support
Motion detection: Support
H.264-1080P Remote Wireless Camera
Operating Instructions

Thank you for having chosen this product. This camera adopts a unique ultra-portable design which enables it to be applied in various fields and brings you convenient safe and colorful daily life. Please follow the steps in the instructions to set up your camera correctly.
1. Press the ON/OFF key to turn on the camera. Press the ON/OFF key for 3 seconds to turn it off.
(When the camera is on you may press Reset for 5 seconds to restart the camera for factory settings)
I. Mode represented by key indicator
Red light is power indicator which is always on when the power is on. Blue light is WIFI indicator.
Specific mode is as follows:
1. Point-to-point mode: Blue light flashes slowly
2. Configuration of remote camera completed: Blue light is always on
If you are not clear what mode it is reset the camera and switch to point-to-point mode.
Note: This reset works only when the blue light is always on or flashes slowly. Press the Reset key for about 5 seconds until the indicators all go out and let go until the camera starts (about 30 seconds).

II. Download APP software

(Figure 1) (Figure 2)

Method 1. Scan the QR code (Figure 1) and enter the download page (Figure 2). Choose to download the software according to the system of the mobile phone. Download and install the computer client through the download address http://lookcam.ffvv.xyz:8800/lookcam_download.html
Method 2. For Android search for APP software called LOOKCAM on Google Play and download and install it.
For Apple search for APP software called LOOKCAM in App Store and download and install it.
Note: If you scan with WeChat when (Figure 2) appears click the browser in sharing in the upper right corner to open and download the software.
After downloading and installing the following icon appears on the mobile phone
III. Point-to-point connection of mobile phone to camera
Enter the mobile phone WI-FI settings find the WiFi account (UID number) and connect. As shown in the figure


After the UID of the device is connected open the phone APP (LOOKCAM). (As shown below)

Click Cancel point-to-point short-range viewing (point-to-point is connected and viewing allowed) and click Yes to fast pair router and enter remote viewing (If you need to set up remote please continue to read the instructions and follow the steps)


IV. Set up the camera remote

When point-to-point video can be viewed return to the previous level and enter the interface as shown in the figure.
Click the setup icon → Advanced Configuration →WiFi Connection Configuration → Find WiFi → Enter Password → Click OK and the camera will restart automatically. (Wait for the camera to restart (about 40 seconds). The camera will change from offline to online at which time the viewable video can be accessed remotely.)




Note: When connecting to remote make sure you enter the correct WIFI password. Otherwise the camera will restart automatically after clicking OK. However due to the wrong password the camera will not be online and then you need to reset it and re-pair.
Resolution Ratio1080P/720P/640P/320P
Video FormatAVI
Frame Number25
Visual Angle150 /90 degree
Motion Detection Camera ShootingStraight line 6 meters
Minimal Illumination1LUX
Video DurationOver 1 Hours
Compressed FormatH.264
Recording Range5㎡
Consumption380MA/3.7V
Storage Temperature-20-80 degree centigrade
Operating Temperature-10-60 degree centigrade
Operation Humidity15-85%RH
Memory Card TypeTF card
Player SoftwareVLCPlayer/SMPlayer
Computer Operating SystemWindows/Mac OS X
Mobile Phone Operating SystemAndroid/iOS
Web browserIE7 and abovechromefirefox safari.etc
Largest customer
4


V. Specifications and parameters
Reminder: What Micro SD Card is required for recording? Why can’t I
use my Micro SD Card for recording? The camera supports
up to 128 GB Micro SD card. Please use High Speed Class
10 FAT formatted memory card. You must format the Micro
SD before using. If SD card is not recognized when
inserted into camera just remove and re-insert.
Why can’t the camera go online?
1. Powerless.
2. Check if your router is working properly or not.
3. Weak Wi-Fi signal.
4. Wrong password wrong while Wi-Fi setting
Why is remote monitoring not smooth? You should choose
a suitable resolution to watch according to your internet
speed.
Why I can’t save to my SD card? SD Card must be
formatted if this is your first time to use it.
How do I when I forgot my password? Press reset key for
10 seconds and restore the factory setting.
5. The ini