USB Blaster (ALTERA CPLD/FPGA Programmer)
Description:

1. Support 1.5V1.8V2.5V3.5V and 5.0V.

2. Support all ALTERA products : CPLD ( MAX3000 MAX7000 MAX9000 and MAX II ) ; FPGA ( Stratix StratixII Cyclone CycloneII ACEX 1K APEX20K and FLEX 10K ) ;Active serial configuration device (EPCS1 EPCS4 EPCS16)

---- Now we have tested chip using this tool is: Cyclone (EP1C3 EP1C6 EP1C12 EP1C20) ; Cyclone II (EP2C5 EP2C8 EP2C35) ; Stratix (EP1S10 EP1S20 EP1S25) ; Stratix II(EP2S60) ; FLEX10K(EPF10K10 EPF0K30) ; ACEX1K(EP1K30) ; MAX7000(MAX7128SLC84 MAX7128) ; AETC100(MAX3000 MAX3128) ; MAXII(MAXII240 MAXII570 MAXII1270) ; EPCS(EPCS1 EPCS4 EPCS16) ; EPC(EPC1 EPC4)

3. Support AS PS and JTAG program ( with Verify and BankCheck function) .

---- When we tested the chip above we use the different program mode: JTAG ( Cyclone CycloneII Stratix II Flex10K Acex1K Max7000 and Max3000) ; AS ( EPCS1 EPCS4 EPCS16 ) ; PS ( Stratix Stratix GX )

4. Support embedded logic analyzer function of SignalTapII

5. Support NIOS II communication and debugger-- When you use it to debug your Black Gold it will not Pop-up warning

6. Faster -- about 6 times than ByteblasterII

7. USB interface ! -- you don need a PC with serial port now

8. 100% compatible with Official ALTERA USB Blaster



Package Included:

1 XUSB Blaster

1 X USB cable

1 X 10pin JTAGE cable

#USB Blaster (ALTERA CPLD/FPGA Programmer) for arduino