What is ABS Plus Material?
ABS Plus is improved and upgraded based on ABS (Acrylonitrile - Butadiene - Styrene).
Compared with ABS cracking and warping have been obviously improved.
1KG Spool Filament:
Spool Diameter: 200mm
Spool Width: 64mm
Hole Diameter: 57mm
Filament Length: 410-425mm
High Compatibility:
Compatible with Most of FDM 3D Printers that use 1.75MM Filament.
Perfect for arts & crafts projects vases and any other 3D printed items.
Vacuumed Sealed Packaging:
Antioxidants + Vacuum Packaging + Product Manual
Easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt.
How to Storage:
1. If you are going to leave your printer inactive for more than a couple of days please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
3. When storing your filament please feed the loose end through the holes on the edge of the filament reel to avoid winding so that it feeds properly when you use it next time.
Please Notice: the picture shown is a representation of the item color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.

ABS+ Characteristic：
【ABS+ Filament】ABS+ is improved and upgraded based on ABS cracking and warping has been significantly improved. High Strength. Better Toughness. Heat Resistance. Wear Resistance. Excellent Impact Strength. Compatible with Most of 3D Printers.
【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints no clogging extremely high successful rate resulting in printed parts that have an outstanding surface finish and are highly precise.
【Tangle Free & No Plugging】Total Length: 410-425m. Full 1KG 3D printer filament reel perfect roundness and very tight diameter tolerance does not overlap or tangle. Melt well feed smoothly and constantly without clogging the nozzle or extruder.
【Recommended Printing Temperature】Printing Temp. at 220-260℃ can give you a smooth prints which require less calibration and give off fewer extruder issues. Use With Heated Build Platform Is Recommended.
【Vacuumed Sealed Packaging】Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles prevent nozzle jams and yield smooth 3D models.

ABS+HS (for High Speed 3D Printer)
Description
eABS+HS is a modified version of ABS material. Compared to conventional ABS it exhibits lower shrinkage and superior interlayer adhesion reducing the likelihood of warping and cracking during printing. It contains low VOC (Volatile Organic Compounds) components resulting in a reduced odor during the printing process making it more comfortable and stress-free. This material is optimized for high-speed printing maintaining its performance even at higher speeds providing an excellent printing experience. Additionally it can be acetone polished to eliminate layer lines and further enhance the print quality.

Features
Heat resistance
Low odor
Low shrinkage rate
Strong performance and toughness
High speed printing
Acetone polishing is available
Excellent printability

eABS-Max
Description
With high toughness and impact resistance eABS Max can print strong and durable parts; The thermal deformation temperature is high so this flame retardant abs filament can be used in some outdoor and high temperature applications.
Feature
Antiflaming
Sturdy and durable
heat resistance
High toughness
High impact resistance
รองรับการออก e-TAX

ต้องการใบกำกับภาษีเต็มรูปแบบ
1.ใบกำกับภาษีจะแนบไปพร้อมสินค้าในกล่องพัสดุ
2.ตอนสั่งซื้อหน้าชำระเงิน ตรงช่องด้านล่างจะมีเขียนว่า “หมายเหตุ” ให้เขียนแจ้งความต้องการ เช่น ขอใบกำกับภาษีเต็มรูปแบบ
3.แล้วก็แจ้งข้อมูลที่จะให้ออกบิลทางช่องแชทร้าน
4.ใบเสร็จจะแนบไปพร้อมกับสินค้าในกล่องพัสดุครับ

**หมายเหตุ เป็นโรลกระดาษ(Paper roll)**