[ใส่โค้ดลด 1000บ.] Hotone Cybery Effects Loop Switcher Pedal Bluetooth
✅รับส่วนลด 10% สูงสุด 1000 บาท กรอก DDX10JUNW1
✅รับเงินคืน 15% สูงสุด 1000 Coin กรอก CCB15JUNW1
📅 วันนี้ - 9 มิ.ย. 2024 เท่านั้น
⛱ กรอกโค้ด ‘HWVUDTX’ ลด 15% สูงสุด 200.- เมื่อช้อปครบ 400.-
⛱ กรอกโค้ด ‘BPWGJ6G’ ลด 15% สูงสุด 150.- เมื่อช้อปครบ 100.-
⛱ กรอกโค้ด ‘NN6WKT’ ลด 15% สูงสุด 50.- เมื่อช้อปครบ 1.-
📆 วันที่ 3 - 5 มี.ค. 67 เท่านั้น!
Hotone Cybery Effects Loop Switcher Pedal Bluetooth
Features
Compact effects pedal loop switcher
4 independent relay-based effects loops with true bypass switching
Switchable input buffer prevents high-frequency loss
Direct switching mode gives you direct control over each loop
Preset switching mode allows you to access 40 programmable presets for custom configurations
Programmable MIDI control supports Program Change and CC messages for controlling MIDI-capable pedals and devices
Built-in Bluetooth connectivity allows you to program your Cybery from your smartphone or tablet via the free Cybery App
A/B output for amplifier channel switching
Mute/Tuner functionality with independent tuner output
CONNECT
Turn on your device’s Bluetooth switch then turn on your Cybery and launch the app. When your Cybery appears listed on the startup page (the app will automatically scan all nearby Cyberys) tap the “Connect” button on the screen.
Notes:
1. The app can’t be used if no Cybery is found.
2. If your Cybery doesn’t automatically come up tap “Scan” on the screen to scan for your device.
3. Cybery can only be edited by one device at a time. To use other devices tap the icon on upper right corner of the screen and tap “Disconnect”. Then connect another device.
TO EDIT THE FUNCTIONS OF CYBERY
Follow the instructions below:
1. Turn on your Cybery.
2. Launch your Cybery app and make sure the Bluetooth switch on your device is ON.
3. Tap the “Connect” button on the screen and wait for the devices to sync.
4. Tap the icon on top of the screen to choose the mode you want. Cybery comes with two modes: Direct Mode and Preset Mode.
5. Tap the footswitch you want to edit on the screen and the available functions appear as below:
