บอร์ดโมดูล 2.9 นิ้ว E-ink E-Paper สำหรับ Raspberry Pi

Features:
No backlight keeps displaying last content for a long time even when power down.
Ultra low power consumption basically power is only required for refreshing.
SPI interface for connecting with controller boards like for Raspberry Pi/Arduino/Nucleo etc.
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
 
Specifications:
Operating voltage: 3.3V
Interface: 3-wire SPI 4-wire SPI
Outline dimension: 90 * 38mm / 3.54 * 1.50in
Package weight: 35g
Display size: 66.89 * 29.05mm / 2.63 * 1.14in
Dot pitch: 0.138 x 0.138
Resolution: 296 x 128
Display color: black white
Grey level: 2
Refresh power: 26.4mW(typ.)
Standby power: 170°
Interfaces:
SYMBOL: DESCRIPTION
VCC: 3.3V
GND: Ground
DIN: SPI MOSI pin
CLK: SPI SCK pin
CS: SPI chip selection low active
DC: Data/Command selection (high for data low for command)
RST: External reset low active
BUSY: Busy status output low active

Package List:
1 x 2.9inch e-Paper Module
1 x XH2.54 8Pin Cable (20cm / 7.87in)

#E-paper #E-paper Module #E-paper Display #E-Ink Screen Module #E-Ink Display Module