มอเตอร์ควบคุมความเร็ว Xxd 30a Esc Brushlessสำหรับเครื่องบินเฮลิคอปเตอร์

Function:
1. Safe power on function: When the power is on the motor will not be started immediately no matter the throttle roer is in any position to avoid personal injury;
2. Throttle stroke calibration function: adapt to the difference of throttle stroke of different remote control improve the linearity of throttle response with smooth delicate speed control feel and first-class speed regulation linearity;
3. Program setting items:
Battery type: Li-xx (lithium battery) / Ni-xx (niel cadmium or niel metal hydride) the default value is Li-xx (lithium battery).
Low Voltage Protection Mode: Reduce power/turn off the output the default is to reduce power.
Low Voltage Protection Threshold: Low/medium/high the default is Cut-off discharge voltage.
When the Li-xx battery is set the number of lithium batteries will be automatically determined. Under low/medium/high conditions the cut-off voltage of each battery is respectively 2.6V 2.85V and 3.1V.
When the Ni-xx battery is set the voltage of the battery pa will be automatically detected when the power is turned on. In low/medium/high cases the cut-off voltage is 0% 45% and 60% of the input voltage at startup (0% means no low-voltage protection).
Startup mode: normal/soft/super soft startup default is normal startup.
Normal start is suitable for fixed wing can start the motor quily in 0.2 seconds
Soft start/super soft start for helicopter; The initial rotation speed of soft start and super soft start is relatively low it takes 1 second and 2 seconds from start to full speed respectively but if the throttle is turned off after start and the starting again within 3 seconds the starting will be in normal mode so as to avoid falling down due to slow reaction during some stunt actions.
Timing: Low/medium/high the default is the middle value.
In general the low Timing can accommodate more motors but to improve efficiency it is recommended to use a low-Timing for a 2-pole motor and a medium-Timing for a motor with more than 6 poles. To increase the speed the Timing can be set to a high value. After improving the Timing setting you should test it on the ground before flying.

Process Features:
1. The power input terminal adopts ultra-low impedance large-capacity electrolytic capacitor which greatly improves the anti-interference ability;
2. The output MOSFET power tube is equipped with an independent heat sink to reduce the temperature rise of the device and improve the systems high current working capacity;
3. Using single-chip control;
4. The single-chip microcomputer adopts an independent voltage-stabilizing chip to avoid power supply interference caused by BEC load change and improve the working stability of the single-chip microcomputer.

Extreme Use:
Continuous current 30A instant 35A 40A for 10 seconds.
Type: (1)Without Plug (2)Welded T plug (3)Gold Plug
Size/Weight: 45 X 24 X 11mm/1.77 X 0.94 X 0.43 25g (Including Cable)
Voltage Range: 4V-16V
Batteries Quantity: 2-4LIPO (4L