Mobil Jet Oil II 1US.Qt

Mobil Jet Oil II
ขนาด 1 US.Qt
Made in USA

Mobil Jet™ Oil II was the first standard Type II oil on the market. With more than five decades of flight experience it has accrued over 5 billion hours of on-wing performance.

This legendary hassle-free second-generation oil helps keep engines clean and operating at peak efficiency. Laboratory tests and engine inspections confirm it can handle extreme speeds temperatures (up to 204 degrees Celsius/400 F) and stresses without breaking down.

Reasons to trust Mobil Jet Oil II

1. It offers excellent deposit control helping maintain engine cleanliness and reducing maintenance costs

2. Provides superb elastomer compatibility helping operators maximize component life and minimize oil consumption

3. Offers exceptional wear performance helping reduce component replacement costs and extend engine gear and bearing life

4. Provides exceptional low-temperature fluidity and outstanding protection at high speeds

5. It carries an extensive range of approvals giving operators increased levels of flexibility

Features and Benefits
Mobil Jet Oil II is formulated to meet the demanding requirements of aircraft-type gas turbines operating over a wide range of severe operating conditions. The product has a high specific heat in order to ensure good heat transfer from oil-cooled engine parts. In extensive laboratory testing and in-flight performance Mobil Jet Oil II exhibits excellent bulk oil stability at temperatures up to 204ºC (400 ºF). The evaporation rate at these temperatures is low enough to prevent excessive loss of volume. Key features and benefits include:

Features
- Excellent thermal and oxidation stability
- Excellent wear and corrosion protection
- Retains viscosity and film strength across wide temperature range
- Chemically stable
- Low pour point


Advantages and Potential Benefits
- Reduces the formation of carbon and sludge deposits
Maintains engine efficiency and extends engine life
- Extends gear and bearing life Reduces engine maintenance
- Provides effective lubrication at high operating temperatures
- Reduces evaporation losses and lowers oil consumption
- Eases start-up in low ambient temperature conditions


Applications
Mobil Jet Oil II is recommended for aircraft gas turbine engines of the turbo-jet turbo-fan turbo-prop and turbo-shaft (helicopter) types in commercial and military service. It is also recommended for aircraft-type gas turbine engines used in industrial or marine applications. Mobil Jet Oil II is approved against the Standard Performance (STD) classification of U.S. Military Specification MIL-PRF-23699. It is also compatible with other synthetic gas turbine lubricants meeting MIL-PRF-23699. However mixing with other products is not recommended because the blend would result in some loss of the performance characteristics of Mobil Jet Oil II. Mobil Jet Oil II is compatible with all metals used in gas turbine construction as well as with F Rubber (Viton A) H Rubber (Buna N) and silicone seal materials.

Mobil Jet Oil II has the following builder approvals *

Engines

• Honeywell/Lycoming-Turbines

• Rolls-Royce/Allison Engine Company

• CFM International

• General Electric Company

• International Aero Engines

• Pratt and Whitney Group

• Pratt and Whitney Canada

• Rolls-Royce Limited

• SNECMA

• Honeywell/Garrett Turbine Engine Company

• Turbomeca

Accessories

• Honeywell-Auxiliary power units and air cycle machines

• Hamilton Standard-Starters

• Hamilton Sundstrand Corp.-APUs constant-speed drives and integrated-drive generators



* Specific engine or equipment approval must be verified with the builder



Specifications and Approvals
This product has the following approvals:

MIL-PRF-23699-STD

PRI-QPL-AS5780/SPC

#Mobil #Jetoil