POE SWITCH 4CH + 2LAN Uplink 10/100M Hyperlink รุ่น HP4EP+2E

POE SWITCH 4CH + 2LAN UPLINK 10/100M HYPERLINK รุ่น HP4EP+2E
เป็นอุปกรณ์จ่ายไฟและส่งข้อมูลไปในสายแลนเส้นเดียวพร้อมกัน รองรับการใช้งานร่วมกับกล้องวงจรปิดแบบ IP-Camera และ Access Point ที่รองรับ POE



Features
1.IEEE 802.3 IEEE 802.3u IEEE 802.3af/at PoE compliant
2.Support PoE IP cameras PoE WIFI AP and PoE IP phones
3.Fluid Control: Full-duplex: IEEE 802.3x Half-duplex: back pressure
4.One-key Smart: Supports two kinds of working modes (100Meter POE Extend 250Meter POE VLAN Mode)
5.All ports support wire speed switching jumbo frame transmission
6.Support upstream ports lightning protection
7. Dynamic power control to ensure stable output power (Enhanced)
8. Improved anti-interference capability to solve problems in the installation of grounding devices (Enhanced twice as good as other manufacturers products)
9.Reliable short-circuit protection to ensure safety (Enhanced)
10.Over-voltage and under-voltage protection (Some other manufacturers products dont support this)



Technical Specification

Model HP4EP+2E
PoE Ports 4
Uplink Ports RJ45 Ports 2
VLAN Isolation √
SUPM Mode(250m) √
Max Transmission Distance 250m
Total Power Budget 65/96W
Switching Capacity 1.2G
Transmission Method Store and forward
Power Input 100~240V AC 50-60 Hz
POE Standard IEEE 802.3af IEEE 802.3at
Power Output Up to 30W per port
Pin Assignment 1/2(+) 3/6(-)
PSE Type End-Span
Temperature Working: -20°~60℃ Storage: -40°~70℃
Humidity (Non-condensing)Working: 10~90% Storage: 5~95%
Network protocol IEEE 802.3 IEEE 802.3i 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T IEEE 802.3af/at IEEE 802.1q
Certifications CE FCC RoHS
Product Dimension (L*W*H/mm) 201*140*45


Typical Application

PoE Application