Soyoung เครื่องสแกนเนอร์ตรวจจับรหัสโค้ดอ่านโค้ด Obd2 Ecu Programmer Upa`Usb

★★★★★★★ยินดีต้อนรับสู่ร้านค้าของฉัน★★★★★★★
ในร้านของเราคุณจะ
♥เพลิดเพลินกับบริการที่ดีที่สุด
♥รับผลิตภัณฑ์ที่ดีที่สุด

เรามี
♥สินค้าที่มีคุณภาพที่ดีที่สุด
♥จิสติกส์ที่ทันเวลาที่สุด
♥ราคาที่เหมาะสมที่สุด

ฉันหวังว่าคุณจะมีประสบการณ์การช็อปปิ้งที่น่าจดจำอย่าลืมที่จะใส่ใจเราการสนับสนุนของคุณคือแรงจูงใจที่ยิ่งใหญ่ที่สุดของเรา !!!

Feature:
1. Support OBDII diagnosis code reading code clearing data flow version number checking reading and writing VIN code and whole system diagnosis.
2. It supports the functions of resetting maintenance lights throttle matching electronic brake pads resetting tire pressure warning lights resetting timing belt maintenance lights resetting electronic steering matching resetting and so on.
3. Added support for many mainstream functions the most versatile ECU programmer. It is a complete kit of all adapters you can experience the powerful UPA‑USB function at present.
4. Easy to use just connect the motherboard directly to the UPA programmer.
5. Comes with a whole set of accessories which can provide much convenience for your using.

Specification:
Item Type: ECU Programmer
Material: ABSLanguage: English.
Hardware Version: V2014
Software Vesion: V1.3
Support for Nec Function but NOT has the specific Adapter in the Package
UPA USB Programmer Description:
New Upa-usb is the full set with all adapters The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. Its equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil narrow) socket to cover most commonly used devices.
Description:
Device configuration is done over special config keys which make the work convenient and safe compared to wiring up all manually.
Additional packages can be covered by commonly available Adapters plugged into the 40 pin ZIF socket.
The main Device further includes a 10 pin ISP connector where the included ISP Adapters can be connected using a standard 1:1 flatribbon cable (included). The included PLCC ISP Adapters are to be put directly over the soldered chip of the target device making the work convenient and safe compared to soldering or using clips connecting up all manually. (Power from the UUSP to the ISP target can be enabled or disabled by a jumper next to the 10 pin ISP connector)
UPA-USB Device Programmer V1.3 Update Info:
Added MC9S12HY64/HA32 support
Added Serial Flash memory support: A25L512/010/020/040/080/016/032 SST25VF512A/010A/020B/040B/080B/016B/032B S25FL004A/008A/016A/032A/064A
Added 24C1024 24C1025 support
Added Bulk erase data memory to PICs 16F913-7/946 12F629/675
Added script function Get Page
Added script function Auto Baud Rate Device (hc08 devices only)
Added script function Get Programmer Frame Child Ctrl( A Child Ctrl Name: string): TControl
Added script function Enable Pic Memory Areas ( AProgram AID AConfig ACalibration AEEPROM: boolean ): boolean;
Fixed bug with script functions Program Device Read Device ... when used with PICs
Fixed bug with SetHC08 Security Bytes (SecBytes: string) function
Fixed bug with 68hc11 reading if Oscillator is not set to Auto
Updated script example files
The software is digitally signed
USB driver upausb.sys is digitally signed
EEproms
Simply connect the mainboard to the UPA programmer directly or by using a DB9 male / female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. You can also use the included DIL to 10pin Flat-ribbon header put it inside the ZIF socket and wire up an SOIC clip or clamps for ISP use from there.
For Motorola MCUs
Pick the Adapter you want to use attach the flat cable to the Adapter (PIN1 is always indicated on both the cable and also the Adapter) and also to the main boards 10pin ISP connector. Select the VCC supply source by the jumper on the mainboard next to the ISP connector (on = target supplied from upa off = target got own supply). Slide the Adapter over the soldered PLCC MCU on the target PCB. (No soldering no pinout reviewing no pin counting saves lots of time and hassle and lets you make your job faster precise and easier)
Once your workshop is equipped with our Adapter Set you will have a all new UPA Exp