TJA1050 CAN Controller Interface Module

TJA1050 CAN Controller Interface Module

Specifications TJA1050 CAN Controller Interface Module
- supply voltage : 5.25V
- DC voltage at pin CANH : -27 ~ +40V
- DC voltage at pin CANL : -27 ~ +40V
- differential bus input voltage : 1.5 ~ 3V
- propagation delay TXD to RXD : 250ns
- virtual junction temperature : -40 ~ +150 ’C
Features TJA1050 CAN Controller Interface Module
- The onboard TJA1050 CAN controller interface chip
- The chip pin has been commonly used derivation convenience for the connection
- Pin 5v power supply
- The PCB board size: 22 mm x11.5 mm
- Fully compatible with the “ISO 11898” standard
- High speed (up to 1 Mbaud)
- Very low ElectroMagnetic Emission (EME)
- Differential receiver with wide common-mode range for high ElectroMagnetic Immunity (EMI)
- An unpowered node does not disturb the bus lines
- Transmit Data (TXD) dominant time-out function
- Silent mode in which the transmitter is disabled
- Bus pins protected against transients in an automotive environment
- Input levels compatible with 3.3 V and 5 V devices
- Thermally protected
- Short-circuit proof to battery and to ground
- At least 110 nodes can be connected.