UV sensor module UV detection
UV sensor module UV detection
โมดูลรังสีอัลตราไวโอเลต เซนเซอร์ DC 3.3-5V 0.1mA ใช้ตรวจจับรังสี UV VCC - is the positive input port of the power supply and is connected to the voltage of 3.3V-5V.
GND -GND is the negative input of the power supply
OUT -OUT is the analog signal output port linking the I/O port of the MCU
Note: Arduino players should set the I/O port of the MCU to input mode/receive mode otherwise it will not be available. Other MCUs or more advanced control boards such as Arm must be set to input mode/receive mode if the I/O port needs to be set to input/output mode otherwise it cannot be used. The 51 series MCU can be used directly no need to set the input and output mode.
Overview:
Designed for applications requiring high reliability and accuracy in measuring UV Index (UVI);
Suitable for measuring the total amount of ultraviolet light in sunlight;
Against the World Health Organization UV Index Grading Standard
Detecting UV wavelength: 200-370 nm;
Very fast response and full interchangeability;
UV index chart: