eSUN Hard-Tough Resin ABS-Like

- ทนแรงกระแทกสูง
- ความต้านทานแรงกระแทกสูงกว่าเรซินปกติ
- เรซินแข็งคุณสมบัติเชิงกลที่ดีเยี่ยมเช่นความแข็งแรงดึงและการดัดงอ
- ความแข็งผิวสูงและทนต่อการสึกหรอ

Hard - Tough Resin Characteristic：
【ABS-Like Resin】Similar to ABS. Shore Hardness 81D. Less Brittle. Higher Toughness and Rigidity. High Impact Strength. Wear Resistance. High Mechanical Properties. Suitable for Printing Industrial Parts that Require Higher Tenacity.
【High Precision & Low Shrinkage】eSUN ABS-Like Resin contains polyurethane acrylate monomers as to reduce volume shrinkage during the photocuring process which ensures the high precision of the print model with smooth finish.
【Fast Curing & Great Stability】eSUN Rapid Resin was designed to reduce printing time with its excellent fluidity. Meanwhile UV resin has good combination of hardness and toughness strong adhesion of the model and easy to detach after forming.
【Professional LCD Molding Resin】Special designed for LED light source to achieve better printing quality. eSUN ABS-Like Resin is compatible for most LCD 3D printers for fast prototyping with automobiles electronic products and architectural models.
【Safe and Secure Packaging】Net Weight: 1000g. Thickened aluminum bottle completely protected from light. Leak-proof bottle fully wrapped with a plastic bubble bag to make sure the resin stays in place where they belong.

How to Use:

1) Shake well before use prohibiting the use of resin in places where there is a lot of sunlight.
2) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
3) Inadvertent contact as soon as possible to use a lot of water rinse. If you feel unwell seek timely medical attention.
4) Once the model is complete please wash it with high 95% degree or higher ethanol alcohol for 30 seconds at least.
5) Do not pour the resin in the resin vat into the unused resin do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect.
How to Store your resin:

1) Keep away from light seals at room temperature. (Sunshine contains a lot of UV light will solidify photosensitive resin.)
2) It is recommended to store the resin under 15C -35℃ in a sealed container. Avoid any dusty or moist environment.
3) The resin is stable under different climatic conditions and is also easy to store overcoming the shortcomings of other resins easily damp softening and environmental corrosion.
Safe Packaging:

Thickened aluminium bottle completely protected from light. Leak-proof bottle fully wrapped with a plastic bubble bag to make sure the resin stays in place where they belong.
Please Note:

The pictures shown are a representation of the item colour may vary slightly due to the colour setting of each individual monitor. Please double check the size and colour before purchasing.


หากต้องการใบกำกับภาษีเต็มรูปแบบ
1.ใบกำกับภาษีจะแนบไปพร้อมสินค้าในกล่องพัสดุ
2.ตอนสั่งซื้อหน้าชำระเงิน ตรงช่องด้านล่างจะมีเขียนว่า “หมายเหตุ” ให้เขียนแจ้งความต้องการ เช่น ขอใบกำกับภาษีเต็มรูปแบบ
3.แล้วก็แจ้งข้อมูลที่จะให้ออกบิลทางช่องแชทร้าน
4.ใบเสร็จจะแนบไปพร้อมกับสินค้าในกล่องพัสดุครับ