eSUN Water Washable Resin for LCD 3D Printer 0.5 Kg

Water Washable Resin Characteristic：

【Water Washable & Lower Odor】Easy to clean you can directly clean the prints with water and no pungent odor which effectively protect your body from contacting alcohol and other industrial solvent low skin irritation improve printing efficiency.
【High Precision & Low Shrinkage】eSUN Water Washable Resin contains acrylate monomers as to reduce volume shrinkage during the photocuring process which ensures the high precision of the print model with smooth finish.
【Fast Curing & Great Stability】Low viscosity and excellent fluidity make it easy to separate the cured resin from the uncured one. Rapid resin was designed to improve print speed shorten the curing time and enhance the printing efficiency of LCD 3D printer.
【Professional LCD Molding Resin】Special designed for LED light source to achieve better printing quality. eSUN Water Washable Resin is compatible for most LCD 3D printers for fast prototyping with architecture jewelry dentistry animation and so on.
【Safe and Secure Packaging】Net Weight: 500g. Thickened aluminum bottle completely protected from light. Leak-proof bottle fully wrapped with a plastic bubble bag to make sure the resin stays in place where they belong.

Recommended Print Parameter:

Bottom Exposure Time: 20-30s
Normal Exposure Time: 6s
Print Thickness: 0.025-0.05mm
Number of Bottom Layers: 3-8

How to Use:

1) Shake well before use prohibiting the use of resin in places where there is a lot of sunlight.
2) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
3) Inadvertent contact as soon as possible to use a lot of water rinse. If you feel unwell seek timely medical attention.
4) Once the model is complete please wash it with high 95% degree or higher ethanol alcohol for 30 seconds at least.
5) Do not pour the resin in the resin vat into the unused resin do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect.
How to Store your resin:

1) Keep away from light seals at room temperature. (Sunshine contains a lot of UV light will solidify photosensitive resin.)
2) It is recommended to store the resin under 15C -35℃ in a sealed container. Avoid any dusty or moist environment.
3) The resin is stable under different climatic conditions and is also easy to store overcoming the shortcomings of other resins easily damp softening and environmental corrosion.
Safe Packaging:

Thickened aluminium bottle completely protected from light. Leak-proof bottle fully wrapped with a plastic bubble bag to make sure the resin stays in place where they belong.
Please Note:

The pictures shown are a representation of the item colour may vary slightly due to the colour setting of each individual monitor. Please double check the size and colour before purchasing.


หากต้องการใบกำกับภาษีเต็มรูปแบบ
1.ใบกำกับภาษีจะแนบไปพร้อมสินค้าในกล่องพัสดุ
2.ตอนสั่งซื้อหน้าชำระเงิน ตรงช่องด้านล่างจะมีเขียนว่า “หมายเหตุ” ให้เขียนแจ้งความต้องการ เช่น ขอใบกำกับภาษีเต็มรูปแบบ
3.แล้วก็แจ้งข้อมูลที่จะให้ออกบิลทางช่องแชทร้าน
4.ใบเสร็จจะแนบไปพร้อมกับสินค้าในกล่องพัสดุครับ